Phone: +44 (0) 1844 339857 and email : admin@geminiprototyping.co.uk

home about us contact us sitemap
Vacuun for fast inexpensive low volume prototype parts

You can have a sample batch to test.

This process utilises silicone rubber as a tooling medium. You can have from 25–80 parts, depending on part geometry and the grade of silicone used.

When you want to bridge the gap between one-off prototypes and the typically larger numbers associated with prototype injection mouldings, this is the perfect solution – and still allows for adjustments to be made later, without launching a full production.

For more information on vacuum casting and how it can help your project to deliver the perfect part contact Gemini today on +44 (0)1844 339857 or email us now.

You can have a sample batch to test

If you need a few parts to test or to hand around to other people you’ll find vacuum casting is just what you need.

It’s a fast and inexpensive process which is ideal for prototyping or for producing small batches of prototype parts without putting the budget up.

You can have precision parts in high performance Polyurethane resins which simulate thermoplastics and rubbers – much more cost effective, quick to produce and ideal when a single prototype is not enough.

Call us today for friendly, expert advise.

Expert advise , just a call away.